Converting the radio into a 30 cm depth metal detector

 

   The first way to make a metal detector

How to make together a metal detector

 The first step is to import the device

 The solution to melt copper and how to prepare it from materials available at home, so we advise everyone to follow the video and ask about anything that seems incomprehensible to you.

the ingredients:

Copper plate to print the circuit on

 The following materials are table salt

 lemon salt

 Hydrogen hair sold in pharmacies.

 The circle is printed on parchment paper, which is the paper used in cooking food and desserts.

The method of work :

Mix 10 ml grams of table salt, 20 ml grams of lemon salt, and 50 ml liters of water, then mix them together well until the salts dissolve in the water.

 Then we add 12 milliliters of hydrogen to the water in which the salts are dissolved

Then we put the printed board in this water for about an hour and after that we take out the board and clean it so that it is ready for perforation.

The board is perforated according to the printed circuit through a small drill in order to succeed in the process of punching the electronic board. The drill can be made to perforate the board in a home manner as follows:

First, we need a medium-sized dynamo, which is usually used in many children’s games or in scanners and scanners. A half-millimeter drill bit is installed on the front of the dynamo, and the bit is fixed through the adhesive well and straight, then the dynamo is supplied with a 12-volt battery, so this dynamo home drill works. Made seamless.

Please follow the video to get the desired benefit

Now we have the easiest device to make, strong and excellent depth

How to install the Ic555 to turn the radio into a metal detector

The first step in the manufacture of a metal detector

How to make a metal detector The first steps are to sew the solution device to melt the copper

And how to prepare it from materials available at home, so we advise everyone to watch the video and ask about anything that seems incomprehensible to you.

Ingredients:

A copper plate to print the circle on. The following materials are table salt, lemon salt, hydrogen hair, which is sold in pharmacies. The circle is printed on butter paper, which is the paper used in cooking food and sweets.

The method of work :

We mix 10 ml of table salt, 20 ml of lemon salt and 50 ml of clean water and mix them together well until the salts dissolve, then add 12 ml of hydrogen to the water in which the salts are dissolved, then put the printed plate in this water for about an hour and then we take out the plate We clean it to be ready to perforate.

The plate is perforated according to the printed circuit through the drill, but it is taken into account that it is small in size so that the punching process for the electronic plate succeeds, and the drill can be made to perforate the plate at home, as follows:

First, we need a medium-sized dynamo, which is usually used in multiple children’s games or in scanners and scanners. A half-millimeter drill bit is installed on the front of the dynamo and the feather is installed through the adhesive well and straight, then the dynamo is supplied with a 12-volt battery, so this home drill works Smoothly crafted dynamo.

Please watch the video of the experiment in the اصنع كاشف معادن channel